QUALITY
Made and Developed in Germany.
Tested and certified by test institute VDE in stricter standard terms Full IEC 61215-1 , -2.
Perform additional stress tests at the Fraunhofer CSP
-
YOUR # 1 PARTNER FOR SOLAR FAÇADE -
MADE AND DEVELOPED IN GERMANY -
Produce Your Own Clean Energy Today
RELIABILITY
Tested by leading test institutes under the hardest conditions
In addition to the ammonia test and salt spray test , the modules have to show a fire class A / B. Solar modules from other manufacturers from the crystalline part often do not reach the pass of this test because of their used EVA-foils.
WARRANTY
10 years on material and workmanship
25 years performance guarantee on:
90% of rated power in the first 10 years
on 80% over 25 years
PANEL SPECIFICATIONS
Nominal Power |
107.5 W |
current at max power |
1.41 A |
voltage at max power |
76.4 V |
Short circuit current |
1.54 A |
Open circuit voltage |
94.4 V |
Length x Width |
1200 mm x 600 mm |
Thickness |
6,9 mm (21,0 mm including junction box) |
Weight |
12 Kgs |
Cell Type |
Cadmium telluride / Cadmium sulfide |
PRODUCT DESIGN
Due to its physical characteristics, cadmium telluride is ideal for the highly efficient conversion of radiation energy into electrical power. The high energy yield is enabled by our solar-active layers that absorb the entire sunlight within just a few thousands of a millimetre.
[1] Front glass
[2] Front contact:highly transparent layer with excellent electrical conductivity for maximum light permeability and practically zero-resistance electricity transport
[3] CdS-Layer
[4] CdTe-Layer
[5] Back contact: highly stable, electrically conductive metal
[6] Glass lamination film: water-insoluble seal, safe protection against escape of contents (e.g. in case of any damage), secure sealing of the module edges
[7] Back glass: specially hardened glass designed for long-term demands
[8] Junction box: including solar cable and connector
TEMPERATURE COEFFICIENT
Calyxo modules produce at temperatures above 25°C more energy than other solar panels, because of their lower temperature coefficient.
Compared to competitors with the same performance Calyxo solar systems produce up to 20 % more income per year.
CELL STRUCTURE
Narrower cell distances leads to a reduction of electrical losses
Positive impact in terms of the conversion of solar energy into electrical solar energy
under mechanical stress extremely durable due to the applied solderless wiring concept that reduces the modules' internal resistance and thus permits an efficient improved yield.
CELL PROPERTIES
The material properties of cadmium telluride is suitable due to its band gap (1,45eV) especially for the conversion of solar energy into electrical energy. The theoretical potential is approximately 29% efficiency.
Cell connection of CX3pro series is compatible with the previous CX3 series
Power and voltage range = identical
CO₂ FOOTPRINT
Most eco-efficient solar panels in the entire solar sector
Clean energy at the lowest cost
Least CO₂ emission impact on our environment (18% less CO₂ than Mono/Poly panels)
The quickest energy payback time
PROJECTS REFERENCES
Beirut - Lebanon
Gwinner/North Dakota - USA
Ascona - Switzerland
Namibia
Australia
Toledo Zoo
Downloads
MX Profile Description
With the Calyxo MX insertion system, you install frameless Calyxo modules of the CX-Series are greatly improved. Specifically designed for the mounting of glass-glass laminates, the Calyxo MX insertion system is compatible with frameless modules suitable for all mounting variations. This is due to its insertion technique no sticking or screwing is required.
Thermal expansion of the roof surface, roof skin or the profi le beam are decoupled from the fl oating module storage of the overall system. The module does not undergo any mechanical stresses and is therefore mounted gently.
